Need help?

H-30 PEM Fuel Cell - 30W

30W PEM Fuel Cell Stack Overview

This fuel cell is a sibling of the 30 watt fuel cell stack that is used in Horizon Educational’s H2GP program, which is a hydrogen fuel cell education initiative.  The 30 watt fuel cell for the H2GP is perhaps the most tried and true product of all the entry-level fuel cell stacks that Horizon offers.  At 30 watts it is an optimized solution for providing a clear sense of how well a low power prototype product will perform in commercial form while still being economical to purchase, and it is light enough to integrate into fuel cells for drones and other flying products.

H-30

Fuel Cell Stack 30W

Additional Information

Like other entry-level fuel cell stacks, the H-30 can be purchased without any supporting components.  However, Horizon Educational recommends contacting us to build an easy-to-use package in order to facilitate incorporation of the product into your project.  Click here to fill out a quote request form if you would like to create a complete package that includes the fuel cell stack and required supporting components.

30W Fuel Cell and Hydrogen

Safety Requirements

Do not connect or disconnect power cables when the fuel cell stack is turned on. Warranty is void if the fuel cell stack is disassembled or otherwise altered. Hydrogen is a colorless, odorless, and flammable substance.  Always operate and store the fuel cell stacks and hydrogen storage canisters in an area with ample ventilation. Fuel cell systems should always be equipped with a highly accurate hydrogen sensor to detect any leaking hydrogen within the system or from the hydrogen storage canister. Please refer to the H-30 User Manual to see a complete list of the safety requirements for the product.

Hydrogen Storage Tip

The best way to supply hydrogen to this fuel cell is using our Hydrostik Pro!  Hydrostiks are a great way to store hydrogen safely and economically, and the best part is that they can be filled using our HydroFill Pro electrolyzer!  Our electrolyzer is able to extract a large amount of hydrogen from a small amount of de-ionized or distilled water.

Fuel Cell Stack 30W Quick Product Facts

Cells

Number of Cells

This fuel cell stack is composed of 14 fuel cells.

Pressure

Hydrogen Pressure

Hydrogen must be fed into the fuel cell stack at a pressure of 0.45-0.55 Bar.

Temperature

Ambient Temperature

The fuel cell stack operates best in a temperature ranging from 41 to 86° F / 5-30° C.

weight

FC Stack Weight

This stack (including fan and casing) weighs 0.62lb / 280g.

 

efficiency

System Efficiency

At full power the efficiency of the system is 40%.

Humidity

Humidification

This fuel cell stack uses self-humidification.

H-30

Performance: 8.4V @ 3.6A
Hydrogen consumption at rated power: 0.42l/min.
Stack dimensions: 8.0 x 4.7 x 7.5cm

List of H-30 components:

1 x 30W fuel cell stack
1 x controller
1 x silicon tube (OD 4 x ID 2.5mm), 50cm long
1 x filter

 

2 x red plastic pin
1 x valve
4 x inlet/outlet gas fitting (M3-4)

Downloads

User Manual

pdf [1.14 MB]

Brochure

pdf [880.45 kB]
pdf [880.45 kB]

This product is only on demand. Please contact us.

Request a Quote
Loading ...
<